Selecting screen aspect and aspect, Selecting screen aspect – Canon XEED SX6000 User Manual
Page 63
63
Adjusting the Image
User’s Manual
Projectin
g
an Ima
g
e
Selecting Screen Aspect and Aspect
Select an optimum aspect ratio of the projected image (screen aspect) or an optimum
screen mode (aspect) according to the aspect ratio of the screen, type of input image
signal and so on for the projection to make best use of the screen size.
[Screen aspect]
Select the same screen aspect ratio as the screen you are using.
[Aspect]
In general, select [Auto].
You may need to change the setting depending on the resolution of the computer or other
AV equipment connected. If the image is not projected with the desired aspect ratio, refer
to
■Selecting Screen Aspect
Select the correct aspect ratio for the screen which is used.
Perform the following steps to select the aspect ratio of the projected image.
1
Press the MENU button to display a menu window.
Remote control
Projector
Remote control