Canon XEED SX6000 - Manual (Page 29)

29
Before Use
Preparing the Remote Control
■Remote Control Operating Range
The remote control is an infrared type. Point it at the infrared remote receiver on the front
or rear of the projector to operate it.
• Use the remote control within a distance of approximately 8 m (26.3') from the projector.
• Use the remote control within an angle of 25° in any direction from directly in front of the
infrared remote receiver.
• The remote control may be inoperative if there is an obstacle between the remote control
and main unit or the infrared remote receiver on the main unit is exposed to direct sunlight
or strong light of lighting equipment.
• When you use 2 or more projectors at the same time, you can change the channel set-
tings to prevent the 2 remote controls from interfering with each other. ( P124 )
(26.3')
(26.3')