Canon XEED SX6000 - Manual (Page 233)

233
Menu Configuration
Image Adjustment Menu
Factory default settings for *1, *2 and *3 are set accord-
ing to the following conditions.
*1: • For Analog PC, Digital PC or HDMI (when [HDMI
In] is [Computer]), the factory default is [Off].
• For Component, and HDMI (when [HDMI In] is
[Auto]), the factory default is [On].
*2: • For HDMI (when [HDMI In] is [Auto]), the factory
default is [Off].
• For Component, the factory default is [Weak].
*3: • For HDMI (when [HDMI In] is [Computer]), Digi-
tal PC or Analog PC, if any image mode is used
except [VividPhoto], the factory default is [Off].
If [VividPhoto] is used, the factory default is
[Middle].
• For HDMI (when [HDMI In] is [Auto]) or Compo-
nent, the factory default is [Weak], regardless of
the image mode.
*4: • WUX4000
Image mode COMMON P109
Standard *
Photo/sRGB
User 1 - 5 (as creating
profile)
Digital PC / Analog PC /
HDMI (when [HDMI In]
is [Computer])
P109
Presentation
VividPhoto
Component / HDMI
(when [HDMI In] is [Auto])
P109
Dynamic
Video
Cinema
Create Profile P110
Baseline Image
Mode (when user
memory is selected) P110
Brightness P111
Contrast P112
Sharpness P113
Gamma P113
Color adjustment P114
Color level
Color balance
Color temperature
R Gain
G Gain
B Gain
R Offset
G Offset
B Offset
Advanced adjustment
Ambient light Off * P115
Adjust
Type Tungsten
Fluorescent
Fluores-
cent H
Level L
M
H
Return
Noise reduction *2 Component / HDMI P116
Off
Weak
Middle
Strong
Dynamic gamma Off *1 P116
Weak *2
Middle
Strong
Mem. color correct *3 Off P117
L
M
H
6-axis color adjust Off * P117
Adjust
Hue / Saturation /
Brightness
Reset
Fine-Tune Gamma P118
Return
Lamp mode *4 Normal * P119
Quiet
Reset OK / Cancel P119