Canon XEED SX6000 - Manual (Page 188)

188
Controlling the Projector from a Computer
When the projector is connected to a network, it is possible to control the projector from a
computer via the network.
1
Turn on the computer and projector.
2
Launch a web browser, enter “http://(projector IP address)” in the address bar, and
press the Enter key.
The password input screen appears.
The factory default IP address is “192.168.254.254”. It is possible to check the IP
address from the projector menu.
3
Enter the user name and password on the password input screen, then click OK.
The factory default user name is “root” and the password is “system”.
4
The projector web screen appears in the web browser. Click [Projector control].