Canon XEED SX6000 - Manual (Page 219)

219
A
pp
endix
Other Information
Product Specifications
■Projector
* 1 When using a Standard Zoom Lens (RS-IL01ST). Varies depending on the type of lens unit.
* 2 When lamp mode (WUX4000) is set to [Normal].
* 99.99% or more of the LCD panel pixels are effective. During projection, 0.01% or less of pixels may stay lit or unlit due to the characteristics of
the LCD panel.
* Using the projector continuously for an extended period of time may accelerate the deterioration of optical parts.
Model name WUX5000 WUX4000
Display system RGB liquid crystal system
Optical system
Color separation by dichroic mirror / polarizing beam splitter and color com-
position by prism
Disp
lay device
Type Reflective liquid crystal panel
Size / Aspect ratio 0.71'' X3 / 16:10
Drive system Active matrix system
Number dots / Total number dots 2,304,000 (1920 x 1200) x 3 panels / 6,912,000
Pr
ojection
lens(*1)
Zoom ratio / Focal length / F value 1.5x / f = 23.0 - 34.5 mm / F1.89 - F2.65
Zooming / Focusing system Electric / Electric
Lens shift V: -15% - +55%, H: ±10%
Light source 330-NSHA 336 W
310-NSHA 300 / 264 W
(lamp mode Normal / Quiet)
Image size (projection distance) (*1) Size 40 to 600 (1.3 m / 4.6' to 29.0 m / 95.1')
Number of colors 16,770,000 colors (full color)
Brightness (*1) 5,000 lumen 4,000 lumen (*2)
Contrast ratio 1000:1 (Full white: Full black, during presentation)
Ratio of brightness at periphery to center (*1) 88%
Speaker 5W monaural x 1
Maximum input resolution 1920 x 1200 dots
V
ideo
signals
Analog PC input
WUXGA / UXGA / WSXGA+ / SXGA+ / WXGA+ / SXGA / WXGA / XGA /
SVGA / VGA
(Scan frequency: Horizontal 15 - 75 kHz, Vertical 50 - 85 Hz)
Digital PC input
WUXGA / UXGA / WSXGA+ / SXGA+ / WXGA+ / SXGA / WXGA / XGA /
SVGA / VGA
Component input 1080p, 1080i, 720p, 576i, 576p, 480i, 480p
HDMI input 1080p, 1080i, 720p, 576p, 480p
Input ter
m
inal
DVI-D IN terminal Digital PC (24-pin DVI connector)
HDMI IN terminal HDMI (deep color)
ANALOG PC / COMPONENT IN terminal Analog PC, Component (mini D-sub 15-pin)
CONTROL terminal RS-232C (D-sub 9-pin)
AUDIO IN Terminal Audio signal (3.5Ø stereo mini jack x 2)
AUDIO OUT Terminal Audio signal (3.5Ø stereo mini jack)
LAN terminal Network connection (RJ-45)
Input sign
al
Digital PC TMDS (Transition Minimized Differential Signaling)
Analog PC
0.7Vp-p, positive polarity, impedance = 75 Ω
Horizontal / vertical synchronization: TTL level, negative or positive polarity
Composite synchronization in G signal: 0.3Vp-p, negative polarity, imped-
ance = 75 Ω
Component video
COMPONENT: Separate Y Cb/Pb Cr/Pr signal
Y: 1Vp-p, negative synchronization, impedance = 75 Ω
Cb/Pb: 0.7Vp-p, impedance = 75 Ω
Cr/Pr: 0.7Vp-p, impedance = 75 Ω
Audio Impedance = 47k Ω or more
Noise 40 dB
39 / 36dB
(lamp mode Normal / Quiet)
Operating temperature 5°C - 35°C
Power supply AC100V - 240V 50 / 60Hz
Power consumption
450W / 1.7W / 0.35W
(Projection / standby / standby with
LAN OFF)
410W / 365W / 1.7W / 0.35W
(normal mode / silent mode / standby
/ standby with LAN OFF)
Dimensions
380 mm (W) x 150 mm (H) x 430 mm (D) / 15.0 (W) x 5.9 (H) x 16.9 (D) in
(not including the projection)
Weight 8.5 kg / 18.7 lbs (not including projection lens unit)
Accessories
Remote control, remote control dry-cell batteries, power cord, PC connection
cable, User’s Manual / Installation Manual (this manual), warranty certificate