Canon XEED SX6000 - Manual (Page 132)

Setting Various Functions
132
Extending the Menu Dis-
play Time
[Menu display time]
The setting for the menu display time can
be extended from the normal 10 or 30 sec-
onds to 3 minutes. For the WUX5000 /
WUX4000, if [Extended] is set, when push-
ing and holding a button on the projector or
remote control, the same key repeat func-
tion will be enabled as when pressing a
button repeatedly.
MENU > [System settings] > [Other settings] >
[Menu display time]
MENU > [Install settings] > [On screen] > [Menu
display time]
Press the OK button to accept your setting
and then press the MENU button or EXIT
button (WX6000 / SX6000).
• [Normal] is the factory default.
• The following display and operation are also
changed.
*1 WUX4000
*2 WX6000 / SX6000
HDMI Component
Digital PC Analog PC
Normal The menu is displayed for 10 or 30 sec-
onds.
Extended The menu is displayed for 3 minutes.
Item [Normal] [Extended]
The display time of the following
screens
-MENU screen
-Input (
P60 )
-Zoom adjustment ( P71 )
-Focus adjustment ( P73 )
-Keystone adjustment ( P76 )
-Keystone reset ( P77 )
-D.image shift adjustment ( P67 , P68 )
-D.image shift reset ( P69 )
-Aspect ( P70 )
-Image mode ( P78 )
-Volume adjustment ( P83 )
-Lamp mode ( P119 ) *1
-Lens shift ( P74 )
-Lens shift reset ( P131 )
10 / 30
seconds
3 minutes
Press-and-hold operation of
pointer buttons other than for
[Zoom adjustment], [Focus
adjustment], and [Lens shift]
Press-and-hold operation of
VOL button
Press-and-hold operation of the
D.ZOOM button
Enabled Disabled
Key repeat *2 [On] [Off]