Brother MFC-J6720DW - Manual (Page 92)

86
f
Open the ink cartridge cover.
g
Press the ink release levers to release
the ink cartridges, and then take out the
ink cartridges. (See Basic User’s Guide:
Replacing the ink cartridges.)
h
Install the orange protective part, and
then close the ink cartridge cover.
IMPORTANT
• Make sure the plastic tab on the left side
of the orange protective part (1) locks
securely into place (2).
• If you cannot find the orange protective
part, ship the machine without it. DO NOT
install the ink cartridges as an alternative
before shipping.
i
Wrap the machine in the bag.
j
Pack the machine and the printed
materials in the original carton with the
original packing material as shown
below.
Do not pack the used ink cartridges in
the carton.
NOTE
If you are returning your machine to
Brother as part of the Exchange Service,
pack only the machine. Keep all separate
parts and printed materials to use with
your “Exchange” machine.
k
Close the carton and tape it shut.
1
2
3
3
4
2
1
1