Brother MFC-J6720DW - Manual (Page 29)

Receiving a fax
23
4
Paging
4
When you choose Paging, your machine
dials the cell phone or pager number you
have programmed. This activates your cell
phone or pager so you will know that you
have a fax message in the memory.
If you have set Paging, a backup copy of the
received fax will be printed at the machine.
a
Press (Settings).
b
Press All Settings.
c
Press a or b to display Fax.
d
Press Fax.
e
Press a or b to display
Setup Receive.
f
Press Setup Receive.
g
Press a or b to display
Memory Receive.
h
Press Memory Receive.
i
Press a or b to display Paging.
j
Press Paging.
k
Enter your cell phone or pager number
followed by # # (up to 20 digits).
Press OK.
Do not include the area code if it is the
same as that of your machine.
For example, press:
1 8 0 0 5 5 5 1 2 3 4 # #.
l
Do one of the following:
 If you are programming your cell
phone number and do not need to
enter a PIN, press OK.
 If your pager needs a PIN, enter the
PIN, press #, press Pause, and then
enter your fax number followed by
# #.
Press OK.
For example, press:
1 2 3 4 5 # Pause 1 8 0 0 5 5 5 6 7 8
9 # #
 If you do not need a PIN, press:
Pause, and then enter your fax
number followed by # #. Press OK.
For example, press:
Pause 1 8 0 0 5 5 5 6 7 8 9 # #
m
Press .
NOTE
You cannot change a cell phone number,
pager number, or PIN remotely.
Fax Storage
4
If you choose Fax Storage, your machine
stores received faxes in the memory. You will
be able to retrieve fax messages from
another location using the Remote Retrieval
commands.
If you have turned on Fax Storage, a backup
copy will be printed at the machine.
a
Press (Settings).
b
Press All Settings.
c
Press a or b to display Fax.
d
Press Fax.
e
Press a or b to display
Setup Receive.