Brother MFC-J6720DW - Manual (Page 68)

Chapter 8
62
j
Enter the number of copies you want,
either by pressing + or - or using the dial
pad on the Touchpanel.
Press OK.
k
Do one of the following.
 Press Print Settings to change
the print settings. (See
PhotoCapture Center™ print
settings on page 64.)
 If you do not want to change any
settings, press Start to print.
ID Photo Print
8
You can select a photo stored in a memory
card or USB Flash drive and print ID photos
for your resume, passport and so on. You can
print four ID photos on one sheet of paper.
NOTE
Just one photo will be printed when you
choose 2x2inch or
50x70mm (2x2.75in) in ID Photo Size,
and 4"x6" in Paper Size.
a
Open the media slot cover.
b
Put the memory card or USB Flash drive
in the correct slot.
c
Press Photo.
d
Press d or c to display
ID Photo Print.
e
Press ID Photo Print.
f
Press d or c to display each photo.
When the photo you want is displayed,
press it.
g
Press a or b to display 2x2inch,
25x36mm, 35x45mm, 36x51mm,
45x45mm, 45x55mm, 35x48mm or
50x70mm (2x2.75in), and then
press the option you want to set as the
photo size.
NOTE
The machine automatically crops the
photo according to the size you choose.
You cannot trim the photo further.
h
Confirm the image displayed on the
Touchscreen.
If necessary, rotate the image by
pressing .
i
Press OK.
j
Do one of the following:
 Press Print Settings to change
the print settings. Go to step k.
 If you do not want to change any
settings, press Start to print.