Brother MFC-J6720DW - Manual (Page 34)

Chapter 4
28
Retrieving fax messages
4
You can call your machine from any
touch-tone telephone and have your fax
messages sent to another machine. Before
you use this feature, you have to turn on Fax
Storage or Fax Preview. (See Fax Storage
on page 23 or see Basic User’s Guide: Fax
Preview (Black & White only).)
a
Dial your fax number.
b
When your machine answers, enter
your Remote Access Code (3 digits
followed by ) at once. If you hear one
long beep, you have messages.
c
When you hear two short beeps,
press 9 6 2.
d
Wait for a long beep, and then use the
dial pad to enter the number of the
remote fax machine where you want
your fax messages sent, followed by # #
(up to 20 digits).
NOTE
You cannot use l and # as dial numbers.
However, press # if you want to insert a
pause.
e
Hang up after you hear your machine
beep. Your machine will call the other
fax machine, which will then print your
fax messages.
Changing your Fax
Forwarding number
4
You can change the default setting of your
Fax Forwarding number from another
touch-tone telephone or fax machine.
a
Dial your fax number.
b
When your machine answers, enter
your Remote Access Code (3 digits
followed by ) at once. If you hear one
long beep, you have messages.
c
When you hear two short beeps,
press 9 5 4.
d
Wait for the long beep, enter the new
number (up to 20 digits) of the remote
fax machine you want your fax
messages forwarded to using the dial
pad, then enter # #.
NOTE
You cannot use l and # as dial numbers.
However, press # if you want to insert a
pause.
e
Press 9 0 to stop Remote Access when
you have finished.
f
Hang up after you hear your machine
beep.