NORD Drivesystems BU0270 - Manual (Page 70)

Supplementary Manual EtherCAT for NORDAC SK 200E
70 Subject to technical amendments BU 0270 GB
8.2.3.2 M12 round plug connector (cable connector)
The following plug connectors are recommended by Getriebebau NORD GmbH.
M12 connector
D coded
Part no.
Supplier Designation
straight angled
Franz Binder GmbH Plug M12, 6..8mm, 4-pin, screwed,
IP67
99 3729 810 04 99 3729 820 04
Phoenix Contact Plug M12, 6..8mm, 4-pin, screwed,
IP67
1521258 Not applicable
Phoenix Contact Ethernet cable plug (straight) to
open ends,
M12, CAT5e, 4-pin,
AWG24 flex., shielded
2m 1524006
5m 1524019
10m 1524022
15m 1524035
No details
Phoenix Contact Ethernet cable plug (straight) to
plug (straight),
M12, CAT5e, 4-pin,
AWG24 flex., shielded
0.5m 1523078
2m
1521533
5m 1524051
15m 1524077
No details
Phoenix Contact Ethernet cable plug (RJ45) to
plug (straight),
M12, CAT5e, 4-pin,
AWG26 flex., shielded
0.5m 1657562
1.0m 1657575
2.0m 1657588
5m 1657591
No details
NOTE
For preference, pre-assembled EtherCAT bus cables and connection components should
be used.
For certain applications, vibration-proof round plug connectors should be used.
3
2
1