Intended use of the frequency inverter – NORD Drivesystems BU0270 User Manual

Page 4

Supplementary Manual EtherCAT for NORDAC SK 200E

About this document

0270

Intended use of the frequency inverter

Compliance

with the operating instructions is necessary for fault-free operation and the

acceptance of any warranty claims. These operating instructions must be read before
working with the device!
These operating instructions contain important information about servicing. They must
therefore be kept close to the device.
The field bus technology options described here are intended for use in combination with SK
200 E series frequency inverters. Use of SK TU4-ECT(-C) technology units is also possible
with the SK 500E series. The use of these technology options with other devices is not
permitted and can lead to their destruction.
The field bus technology options and the associated frequency inverters are devices for fixed
installation on motors or in equipment close to the motor to be operated. All details
regarding technical data and permissible conditions at the installation site must be
complied with.
Commissioning (implementation of the correct use) is not permitted until it has been ensured
that the machine complies with the EMC directive 204/108/EEC and that the conformity of the
end product meets the machine directive 2006/42/EEC (note EN 60204).