West Control Solutions N6600 - Manual (Page 99)

3.3.14 Lock Code
When this item is selected, the displays will be of the form:
where the upper display shows the current Set Up Mode Lock Code (a Read Only
display - it cannot be edited in Configuration Mode). This serves as a reminder in
case the Lock Code has been forgotten (see also Volume 1, Subsection 3.2.41).
3.4 EXIT FROM CONFIGURATION MODE
To leave Configuration Mode,, depress the Raise and Function keys
simultaneously. This will cause a return to the Operator Mode to be made.
NOTE: An automatic exit to Operator Mode will be made if, in Configuration
Mode, there is no front panel key activity for two minutes.
The exit is made via the power-up self-test routines which include a lamp test.
S075-3 3-12
PM-0075