West Control Solutions N6600 - Manual (Page 93)

3.3.2 Output 1 Action
When this item is selected, the displays will be either of:
The setting can be changed and confirmed as previously described. The default
setting is reverse-acting.
NOTE: If the secondary output is chosen as Output 2 (COOL) control output,
its action is always the complement of the action of Output 1.
3.3.3 Alarm 1 Type
When this item is selected, the displays will be of the form:
the upper display indicating the current Alarm 1 type, which may be one of:
The setting can be changed and confirmed as previously described. The default
setting is Process High alarm. The operation of the alarm types is shown in Volume
1, Figure 3-2.
S075-3 3-6
PM-0075