West Control Solutions N6600 - Manual (Page 96)

This setting can be changed and confirmed in the manner previously described.
The default setting is Alarm 2 hardware output, direct-acting. The operation of the
different alarm types is illustrated in Volume 1, Figure 3-2. The operation of
logically-combined (AND/OR) alarms is explained in the table above.
3.3.8 Output 3 Usage
The displays for this item are of the form:
in which the upper display indicates the usage, which will be one of the following:
This setting can be changed and confirmed in the manner previously described.
The default setting is Alarm 1, direct-acting (for a relay/SSR output) or Process
Variable Recorder Output (for a DC output). The operation of the different alarm
types is illustrated in Volume 1, Figure 3-2. The operation of logically-combined
(AND/OR) alarms is explained in the table above.
3-9 S075-3
PM-0075