West Control Solutions N6600 - Manual (Page 32)

When the Soft Start Time expires, the normal setpoint value is restored. Default
value is Input Range Minimum.
3.2.35 Soft Start Time
This parameter defines the duration of the Soft Start from power-up. After this time
expires, normal setpoint values will prevail. This parameter is adjustable in the
range 15 seconds to 59 minutes 45 seconds (in 15-second increments) and OFF
(less than 15 seconds); the default value is OFF.
3.2.36 Auto Pre-Tune Enable/Disable
This parameter determines whether or not Pre-Tune is activated automatically on
power-up or not (0 = Disabled, 1 = Enabled). The default setting is 0 (Disabled).
3.2.37 AM Key Usage
This parameter may be set to one of three options:
The default setting is Output Turn-Off.
3.2.38 Setpoint Ramp Enable/Disable
This parameter enables/disables use of the setpoint ramping feature at user level
(0 = Disabled, 1 = Enabled). The default setting is 0 (Disabled).
3-16 O075-3
PM-0075