Thermo Fisher Scientific CyberScan 6000 Series Meters v.1 User Manual

Page 93

Conductivity Setup: Conductivity Setup Screen

PC6000, CON6000, PC6500 and PCD6500 meters

Technology Made Easy ...

Available in PC6000, CON6000, PC6500 and PCD6500, the conductivity Setup screen present
many options to control the operating parameters of the meter. The meter is factory set with
regard to these options, and is ready for use under most circumstances (see ‘Appendix: 6000
Series Meters Factory Default Settings’ section for default settings). The operating parameters
of the conductivity mode can be set and controlled from the conductivity setup screen. The
conductivity Setup section will guide you through the various options available in the conductivity
setup mode.

Function Buttons on Conductivity Setup Screen
Touch OK to confirm conductivity Setup and return to the conductivity Measure screen.

Touch Cancel to exit and return to the conductivity Measure screen without confirming
conductivity Setup.

Touch View to view all conductivity data points stored in memory. See ‘Conductivity Setup:
View Stored Data’ section for details.

When you touch the Help button, information about the current screen appears. This information
includes step-by-step instructions for operating the meter from the current screen and possible
applications information for that screen.

Touch Reset to reset all conductivity Setup Criteria to the factory default.

Example: - PCD6500 Conductivity Setup screen