beautypg.com

Thermo Fisher Scientific CyberScan 6000 Series Meters v.1 User Manual

Page 25

background image

13

Getting Started: Conductivity Cells

PC6000, CON6000, PC6500 and PCD6500 meters

Technology Made Easy ...

The 6000 series meter – PC6000, CON6000, PC6500 and PCD6500 - allows you to use two
types of conductivity cells: the 2-cell conductivity cell and the 4-cell conductivity cell with DIN
connector. Only one type of conductivity cell can be connected at
a time.

1. Carefully remove the protective cover from the end of

the conductivity cell. Before using your conductivity cell,
soak it for 5 to 10 minutes in distilled or deionized water.

2. Connect the 2-cell or 4-cell conductivity cell to the

conductivity cell jack. The 2-cell and 4-cell
conductivity cells have built in ATC probes. Therefore,
there is no need to connect a separate ATC probe.

3. Rinse and blot-dry (don't wipe) probe between each measurement. Rinse probe with

distilled or deionized water, or a portion of the next solution to be measured.

4. Between measurements, conductivity probes can be stored dry.