Thermo Fisher Scientific CyberScan 6000 Series Meters v.1 User Manual
Page 77
65
DO Setup: Set Sample ID
DO6000 and PCD6500 meters
Technology Made Easy ...
You can manually enter an alphanumeric identification number of 10 characters for any sample or
you can have the meter sequentially number your samples beginning at the number of your
choice. You can also choose to deactivate the sample ID.
To set sample ID — Manual:
1. Touch Manual for manual Sample ID entry.
2. The current ID is displayed on the screen.
3. Use the alphanumeric keypad on the screen to enter the desired Sample ID. The BS key
will allow you to backspace to remove a character that was incorrectly entered.
4. Touch Enter to accept current Sample ID and return to the Setup screen.
To set sample ID — Sequential
1. Touch Sequential for sequential Sample ID entry.
2. The current ID is displayed on the screen.
3. Use the numeric keypad on the screen to enter the desired Sample ID number that you
would like your sequential Sample ID assignment to begin with. Every time you touch
Print or Log Data on the Measure screen, the Sample ID will increase by 1. The BS key
will allow you to backspace to remove a character that was incorrectly entered.
4. Touch Enter to accept the first sequential Sample ID and return to the Setup screen.
To deactivate the sample ID assignment — None
1. Touch None to deactivate the sample ID assignment.