Thermo Fisher Scientific CyberScan 6000 Series Meters v.1 User Manual
Page 41
29
pH Setup: pH Setup Screen
PH6000, PC6000, PH6500, PC6500 and PCD6500 meters
Technology Made Easy ...
Available only in PH6000, PC6000, PH6500, PC6500 and PCD6500
meters, the pH Setup screen
presents many options to control the pH operating parameters of the meter. The meter is factory
set with regard to these options, and is ready for use under most circumstances (see ‘Appendix:
6000 Series Meters Factory Default Settings’ section for default settings). The pH Setup
section will guide you through the various options available in the pH setup mode.
Function Buttons on pH Setup Screen
Touch OK to confirm pH Setup and return to the pH Measure screen.
Touch Cancel to exit and return to the pH Measure screen without confirming pH Setup.
Touch View to view all pH data points stored in memory. See ‘pH Setup: View Stored Data’
section for details.
When you touch the Help button, information about the current screen appears. This information
includes step-by-step instructions for operating the meter from the current screen and possible
applications information for that screen.
Touch Reset to reset all pH Setup Criteria to the factory default.
Example: - PCD6500 pH Setup screen