Thermo Fisher Scientific CyberScan 6000 Series Meters v.1 User Manual
Page 57
45
mV Setup: Set Print Criteria
PH6000, PC6000, PH6500, PC6500 and PCD6500 meters
Technology Made Easy ...
This screen allows you to select which criteria are printed with the measurement when you print
the data. The status of the current print criteria is displayed on the screen. The criteria option is
active if ON appears to the right of the option. It is inactive if OFF appears to the right of the
option. Any active criteria will be printed on demand.
To set Print Criteria
1. Touch the Touch here to edit button next to the Print Criteria to access the mV Print
Criteria Setup screen.
2. Touch ON or OFF to change the status of a criteria you want to modify.
3. Repeat step 2 for all the remaining criteria except Print Interval (or Print Option).
4. For Print Interval (or Print Option), select between Log Data and Timed. If “Log Data” is
selected, clicking on the “Print” button from the Measurement screen will send the logged
data to the printer. If “Timed” is selected, you can print data at an interval you select. This
data is buffered and is sent to the printer when the page is full.
5. Touch OK button to accept the changes of the entire group of print criteria and return to
the mV Setup screen.