Thermo Fisher Scientific CyberScan 6000 Series Meters v.1 - Manual (Page 75)

63
DO Setup: DO Setup Screen
DO6000 and PCD6500 meters
Technology Made Easy ...
The DO6000 and PCD6500 meter allows you to measure DO, BOD, OUR and SOUR. Each
mode is independent from one another and needs to be setup separately. However the basic
setup procedure is virtually identical for each mode with exceptions noted. This manual will focus
on DO Setup screens, but each mode will setup in the same manner. BOD, OUR and SOUR
have a configuration to edit in the setup mode, see BOD, OUR and SOUR Setup.
The DO Setup screen present many options to control the operating parameters of the meter.
The meter is factory set with regard to these options, and is ready for use under most
circumstances (see ‘Appendix: 6000 Series Meters Factory Default Settings’ section for
default settings). The operating parameters of the DO mode can be set and controlled from the
DO setup screen. The DO Setup section will guide you through the various options available in
the DO setup mode.
Function Buttons on DO Setup Screen
Touch OK to confirm DO Setup and return to the DO Measure screen.
Touch Cancel to exit and return to the DO Measure screen without confirming DO Setup.
Touch View to view all DO data points stored in memory. See ‘DO Setup: View Stored Data’
section for details.
When you touch the Help button, information about the current screen appears. This information
includes step-by-step instructions for operating the meter from the current screen and possible
applications information for that screen.
Touch Reset to reset all DO Setup Criteria to the factory default.
Example: - PCD6500 DO Setup screen