KROHNE TIDALFLUX IFM 4110 PF EN - Manual (Page 80)

7.30830.32.00 80
If you need to return flowmeters for testing or repairing to Krohne
Your electromagnetic flowmeter has been carefully
manufactured and tested by a company with ISO 9001
certification.
If installed and operated in accordance with these
operating instructions, your flowmeter will rarely present
any problems.
Should you nevertheless need to return a flowmeter for
checkout or repair, please pay strict attention to the
following points:
Due to stationary regulations concerning protection of the
environment and the health and safety of out personnel,
Krohne may only handle, test and repair returned
flowmeters that have been in contact with liquids if it is
possible to do so without risk to personnel and
environment. This means that Krohne can only service
your flowmeter if it is accompanied by a certificate in line with the following model confirming that the flowmeter is
safe to handle.
If the flowmeter has been operated with toxic, caustic,
flammable or water-endangering liquids, you are kindly
requested
•
to check and ensure, if necessary by rinsing or
neutralizing, that all cavities in the flowmeter are free from
such substances (directions on how you can find out
whether the primary head has to be opened and then
flushed out or neutralized are obtainable from Krohne on
request).
•
to enclose a certificate with the flowmeter confirming
that the flowmeter is safe to handle and stating the liquid
used.
Krohne regret that they can not service your flowmeter
unless accompanied by such a certificate.
S P E C I M E N certificate
Company: ………………….………….…………..……… Address:
……………………………………………….…
Department: ……………….………………………..……. Name:
…………………………………………………….
Tel. No.: ………………………………….……………….
The enclosed electromagnetic flowmeter
Type: ……………………………………………………... Krohne Order No. or Series No.:
………………………...
has been operated with the following liquid:
……………………………………………………………………………………
Because this liquid is
water-endangering
*
/ toxic
*
/ caustic
*
/ flammable
*
we have
- checked that all cavities in the flowmeter are free from such substances *
- flushed out and neutralized all cavities in the flowmeter
*
(
*
delete if not applicable)
We confirm that there is no risk to man or environment through any residual liquid contained in this flowmeter.
Date: …………………………………………………..….. Signature:
…………………………………………………
Company stamp: