KROHNE TIDALFLUX IFM 4110 PF EN User Manual

Page 5

7.30830.32.00

How to use these Installation and Operating Instructions

•

For easy reference these instructions are divided into 5

parts.

•

Only Part A is needed for installation and initial

start up.

•

All electromagnetic flowmeters are factory-set to your

order specifications. Therefore, no further adjustments
are necessary prior to start-up.

Part A

Install flowmeter in the pipeline , connect
up, power the flowmeter, that’s all!
The system is operative.

Part B

Operator control and action of the IFC 110
PF signal converter.

Part C

Special applications, service, and functional
checks.

Part D

Technical data, dimensions, block diagram
and measuring principle.

Part E

Index

Product liability and warranty

These electromagnetic flowmeters are suitable solely for
measuring the volumetric flowrate of electrically
conductive liquids, slurries and pastes.
Responsibility as to suitability and intended use of our
instruments rests solely with the operator.

Improper installation and operation of the flowmeters
(systems) may lead to loss of warranty.
In addition, the “General conditions of sale” forming the
basis of the purchase contract are applicable.
If TIDALFLUX flowmeters have to be returned to
Krohne, please fill in the form on the penultimate page of
this installation and operating instructions manual. A repair
or checkout is only possible when this form is filled in
completely and returned to Krohne together with the
instrument.

System description

The IFM 4110 PF electromagnetic flowmeters are
precision instruments designed for the linear flow
measurement of electrically conductive liquids, pastes and
slurries with a minimum conductivity of 50

µS/cm

(

µmho/cm). The combination of a magnetic inductive

flowmeter and a capacitive height measuring system
stands for precise flow measurement in both fully and
partly filled pipe lines. The filling degree must be at least
10 percent of the inner diameter.

Example of type designation:

IFM 4 110 PF

Partly filled flowmeter

110 IFC 110 PF signal converter,

field housing.

Primary head type IFS 4000

IFM Electromagnetic flowmeter

system