KROHNE TIDALFLUX IFM 4110 PF EN - Manual (Page 22)

7.30830.32.00 22
4.2 Operating and control elements
…the 15 keys à and Ä accessible
after
removal of the glass cover,
…the 3 magnetic sensors Ç and the
bar magnet without opening the
housing (optional).
À Display, 1st line Displaying numerical data
Á Display, 2nd line Displaying units and texts
 Display, 3rd line 6 arrows to mark the current display
flow rate current flow rate
totalizer + totalizer
- totalizer
Σ Σ
sum totalizer (+ and -)
control in 1/2 control input 1 or 2 active
à 5 keys for operating the signal converter
← → ↵ ↑ ↓
Ä 10 keys for direct numerical setting of function values (not function numbers)
Å Compass field showing that a key is pressed
Æ magnet active LED green/red, magnetic sensors active
green = built-in magnetic sensors (optional), see Ç
red = operation of one of the 3 magnetic sensors
Ç 3 magnetic sensors (optional), operated by bar magnet without opening the housing, function of the sensors as described
for the three keys
→ ↵ ↑
, see Г.
И diagnostics 2 LED’s signaling the status of measurement
normal green LED = correct measurement, everything O.K.
error red LED = error, parameter or hardware error
É IMoCOM ImoCom bus, multipoint connector for connecting external supplementary equipment, see
sect. 6.4, slide window to the left
The instrument can be
operated by means of ….
→ ↵ ↑
flowrate
c1 c2
control in
+ -
∑
totalizer
136.49
m3 / hr
6 6 6 6 6 6
34
5
6
- - - - error
&
- - - - !
- - - - normal
diagnostics
magnet
active
KROHNE IFC 110 PF
IMoCom
← → ↵ ↑
1 2 3 4
6 7 8 9
•
‚
ƒ
„
…
†
‡
ˆ
‰
Š