KROHNE TIDALFLUX IFM 4110 PF EN - Manual (Page 30)

7.30830.32.00 30
ADC-HARDW. Hardware error A/D converter Replace ADC printed circuit board
ADC GAIN Hardware error A/D converter Replace ADC printed circuit board
FC-HARDW. Hardware error on field current PCB Replace field current PCB
FATAL.ERROR Fatal error, measurement interrupted Replace electronic unit or consult
factory.
4.6 Resetting the totalizer and deleting error messages, RESET/QUIT menu
Delete error messages in RESET/QUIT menu
Key Display Description
- - - - - - - - - - - - / - - - Measuring mode
↵
CodE 2 - - Key-in entry code 2 for RESET/QUIT menu:
↑ →
↑ →
ERROR QUIT. Menu for error acknowledgement
→
QUIT. NO Do not delete error messages,
press
↵
key twice to return to measuring mode
↑
QUIT. YES Delete error messages
↵
ERROR QUIT. Error messages deleted
↵
- - - - - - - - - - - - / - - - Return to measuring mode
Reset totalizer in RESET/QUIT menu
Key Display Description
- - - - - - - - - - - - / - - - Measuring mode
↵
CodE 2 - - Key-in entry code 2 for RESET/QUIT menu:
↑ →
↑ →
ERROR QUIT. Menu for error acknowledgement
↑
TOTAL.RESET Menu for resetting totalizer
→
RESET NO Do not reset totalizer,
press
↵
key twice to return to measuring mode
↑
RESET YES Reset totalizer
↵
TOTAL.RESET Totalizer is reset
↵
- - - - - - - - - - - - / - - - Return to measuring mode