KANOMAX 3910 Portable Particle Counter User Manual User Manual

Page 70

3. Display Description and Operation Procedure

(a)

(b) (c)

(d)

· Log Maintenance

The “Log Maintenance” screen shows up
when you select “LOGS” on the control panel.
Users can review and print-out the log files,
such as the operation log, alarm log, and
error log

*User needs the authorization (View

Logs) to view logs.

*User needs the authorization (Copy

Files) to copy files.

(a) Log List

Shows following information; Date/Time, User ID, Operation (requests and results), and
Parameters

(b) User ID

Select user ID to review the user’s logs.

Select the type of log from the following:
Operation： shows operation logs.

Alarm：shows alarm logs.

Error：shows error logs.

(d) Date

Select start date and end date for logs

Tap [Update] to refresh the log list, which is based on the criteria you select in (b), (c) and (d).
Tap [Print] to print out the current information from the log list.
Tap [Copy] to copy the selected log files to the MMC card or USB flash drive (Authentication
required). If the MMC card and USB flash drive are inserted together, a box will appear asking you
to select either of the two.
Tap [Close] to go back to the control panel.