7 file – KANOMAX 3910 Portable Particle Counter User Manual User Manual

Page 55

3. Display Description and Operation Procedure

3.7 FILE

Select [FILE] on the initial screen. Then a screen
shown to the left will be displayed. You can display,
print and delete data here. You can also display the
list of files that has been outputted in the
ALARM/ERROR LOG screen.

*User needs to have authorization to copy files.
*User needs to have authorization to delete

files.

The file name consists of an abbreviation of the
measurement mode + Date + Time.
The measurement mode abbreviations are;

(a) To display names of every saved file,

check “OPEN”. (When this screen is
open, “OPEN” is selected by default.)

(b) Use “MEASURE MODE” to narrow down the files

to be displayed.

the file name will be displayed in the box for
“FILE NAME”. Then tap [OK] to open the data
display screen as shown below.

Tap CALC DATA tab to display CALC result.
Tap SETTING tab to display the setting information.

(e) To delete the displayed file, tap [DELETE]. A dialog will be

displayed asking you if you want to delete it or not. Tap
[YES] to delete the file displayed.

(f) Tap [PRINT] to print the data.

(g) Tap [CLOSE] to close a window.

(h) In STATS mode and STANDARD mode, you can change the

data to be displayed by selecting LOCATION.

Data Display Screen

(a)

(b)

(c)

SG: SINGLE

FS: FEDERAL STANDARD

CO: CONTINUOUS

BS: BRITISH STANDARD

IN: INTERVAL

EC: EC GMP

ST: STATS

GB: GB/T

IS: ISO

(e) (f)

(g)

(h)

(e) (f)

(g)

(h)

(e) (f)

(g)