KANOMAX 3910 Portable Particle Counter User Manual - Manual (Page 63)

3. Display Description and Operation Procedure 55
· START DELAY
In the START DELAY window set a
measurement delay time.
Tap the entry field to display a keyboard.
Enter “hours”, “minutes” and “seconds” then
tap [OK] to activate the settings
(Authentication required).
· MESSAGE SETTING
In the MESSAGE SETTING window, you can
choose whether or not to display messages
for “PREPARATION” and “DELAY”.
Tap [OK] in order to activate the settings
(Authentication required).
- PREPARATION:
will display a message after the pump
is ON before sampling starts.
- DELAY:
will display a message before sampling
starts when START DELAY function is
ON.