KANOMAX 3910 Portable Particle Counter User Manual User Manual
Page 46
3. Display Description and Operation Procedure
38
- When using a MAP file
In STANDARD measurement tap [START] to
display a MAP.
A measurement will start based on the
settings configured in 3.5 MODE .
Select a Location and tap [START] to start a
measurement.
Tap [STOP] to stop a measurement.
Tap [ZOOM] to enlarge a MAP.
(Press [NORMAL] to return to viewing the
entire MAP when a map is enlarged.)
When a MAP is enlarged, [SCROLL UP],
[SCROLL DOWN], [SCROLL LEFT] and
[SCROLL RIGHT] buttons are activated,
which enables you to move the MAP.