KANOMAX 3910 Portable Particle Counter User Manual User Manual
Page 27
3. Display Description and Operation Procedure
19
3.5.2 CONTINUOUS
[Measurement Flow]
Start/Stop measuring manually.
Example: If the setting is as follows:
INTERVAL :
N/A
SAMPLE T.
: N/A
CYCLES :
N/A
A continuous measurement is performed until you manually stop it.
[Measurement Settings]
Check “AUTO SAVE” to store the data
automatically.
Check “AUTO PRINT” to print the data
automatically.
Check “START DELAY” to use a delay time
prior to a measurement.
Check “Set time” to set the time when you
want to start a measurement.
Tap [OK] to save and activate the current
settings (Authentication required).
[PRESET]
Tap [PRESET] to display a window asking you
to input “PRESET NAME”.
Tap the entry field to display the keyboard.
Enter the file name and tap [Enter].
Tap [OK] to save the current settings on the
MMC card (Authentication required).
* In the future you can load the configuration
saved here as a PRESET. Refer to 3.5.6
PRESET.
Sampling Time
Start
Measurement
Finish
Measurement
Wait Time
STOP