KANOMAX 3910 Portable Particle Counter User Manual User Manual
Page 40
3. Display Description and Operation Procedure
32
- When using a MAP file
In STATS mode, a MAP will be displayed upon
tapping [START].
A measurement will start based on the
settings configured in 3.5 MODE .
Select a Location and tap [START] to start a
measurement.
Tap [STOP] to stop a measurement.
Tap [ZOOM] to enlarge a MAP.
(Press [NORMAL] to return to viewing the
entire MAP when a map is enlarged.)
Select a Location and tap [DETAIL] to view
the image of the selected Location.
(You need to register the image for the
[DETAIL] view when creating a Schedule
using the provided PC application.)
When a MAP is enlarged, [SCROLL UP],
[SCROLL DOWN], [SCROLL LEFT] and
[SCROLL RIGHT] buttons are activated,
which enables you to move the MAP.
.
The color of a location changes from green to
red once a measurement is done.