KANOMAX 3910 Portable Particle Counter User Manual - Manual (Page 23)

3. Display Description and Operation Procedure 15
3.4 MONITOR
Tap [MONITOR] on the initial screen to start
monitoring. Sampling will start in 10
seconds after the pump starts operating.
* Note that if the pump is already
operating, sampling will start
immediately when you tap [MONITOR].
* Note that the instrument is capable of
180 hours of continuous operation.
While measuring, tap [MONITOR] again. A
dialog will be displayed asking you if you
want to stop monitoring. Tap [Yes] to stop
monitoring.
Note that you cannot save measurement
data or display the chart when you are
monitoring in this mode.