KANOMAX 3910 Portable Particle Counter User Manual User Manual
Page 42
3. Display Description and Operation Procedure
34
When a measurement is finished, a
measurement result window will be
displayed.
Tap [NEXT] to display the MAP again. Then
the instrument waits for the next
measurement point to be selected.
Tap [REMEASURE] to perform a
re-measurement at the current location.
Tap [PRINT] to print the measurement
results.
When all measurements are finished, the
final measurement results will be displayed.
You can view the results of a certain
LOCATION POINT by selecting Location from
the dropdown list of [LOCATION].
Tap [CLOSE] to end the measurement.
Tap [REMEASURE] to perform a
measurement again at the last
measurement point.
Tap [PRINT] to print measurement results of
the last measurement point.
Every time you tap this button,
the particle unit changes in the
order of:
p -> p/cf -> p/m³.
Use this button to select either
Total display or Single display.
(Only applicable for RAW DATA)