KANOMAX 3910 Portable Particle Counter User Manual - Manual (Page 45)

3. Display Description and Operation Procedure 37
When all measurements are finished, the
final measurement results will be displayed.
You can view the result of a certain
LOCATION POINT by selecting Location from
the dropdown list.
Tap [EVAL] to display CLEAN ROOM
EVALUATION window.
Tap [REMEASURE] to perform a
re-measurement.
Tap [PRINT] to print a measurement result.
Tap [PRINT] to print a measurement result.
By selecting particle size you can change the
particle size of the data to be evaluated.
However, the status indicated by
RESULT is determined based on the particle
size selected in “MODE” settings.
Tap [CLOSE] to close the window.