KANOMAX 3910 Portable Particle Counter User Manual - Manual (Page 64)

3. Display Description and Operation Procedure 56
3.8.2 Setting
In the Setting window you can configure the
following;
-
DATE/TIME
- LCD
- SOUND
- COMMUNICATION
- PUMP
- REGION
· DATE/TIME
DATE/TIME setting;
To adjust DATE, tap [▼] to display a calendar
and set the date.
To change the TIME, tap “hours”, “minutes”
and “seconds” then use the [▲/▼] buttons
to adjust the selected number.
Tap [OK] to activate the settings
(Authentication required).
· LCD
In the LCD settings, configure the Power
saver time-out and Brightness setting. Also
the LCD displays the power state of the unit
(battery level, power source (AC/battery),
battery charging, etc.).
For the Power saver time-out setting, select
one among 1min, 2min, 5min, 10min, 15min,
& 30min.
To configure the brightness setting, move the
slider to the desired setting.
Tap [OK] to save the settings
(Authentication required).