Lincoln Electric IM946 CRUISER Digital Tractor - Manual (Page 99)

Cruiser™ Tractor
OPERATION
10-22 10-22
Memory 2 Limits
Enable/Disable
Enable Limits?
Yes No
7. Press the left MSP4 button (YES) to
save and enable limits and exit.
Press the right MSP4 button (NO) to
exit and leave limits unchanged.
Enabling/Disabling Limits
1. Limits for each memory may be en-
abled or disabled by pressing and
holding the appropriate memory but-
ton for 10 seconds.
2. Release the memory button when the
MSP4 display shows the message
shown to the right.
3. If the passcode does not equal zero,
enter the passcode. If the passcode
is zero (0000), SETUP will light, and
the MSP4 display shows the message
shown.