beautypg.com

Cables and connections – Lincoln Electric IM946 CRUISER Digital Tractor User Manual

Page 73

background image

Cruiser™ Tractor

CABLES AND CONNECTIONS

9-6

9-6

Connecting Welding Power Cables to Contact
Nozzle Assembly - All Configurations

1. Rotate the brass bar on the nozzle towards the base of the

Cruiser™ tractor. To rotate, loosen the two screws holding the
nozzle clamps.
Rotate the nozzle assembly and retighten the two screws.

2. Attach the electrode cable to the nozzle tang using the 1/2-inch

bolt supplied:

a. Attach flat side against tang.

b. Place connection lug of sense lead

on top of the cable lug and below the
bolt head.

c. If a second cable is used, attach it to

the underside of the tang.

3. Place the cable (or cables) underneath

the strain-relief bracket mounted to the
Cruiser™ tractor. Enough cable length
must be left toward the front of the
Cruiser™ tractor to permit attaching to
the K-231 contact nozzle assembly.

Note:

Enough slack must also be

provided, so adjusting the
welding torch to the desired
position is not interfered.