Lincoln Electric IM946 CRUISER Digital Tractor - Manual (Page 101)

Cruiser™ Tractor
OPERATION
10-24 10-24
Setup Features Menu
The Setup Menu provides access for configuring user preferences, which are generally only set at installation. The
user preferences are grouped as shown in the following table.
ACCESSING THE SETUP MENU
1. ACCESS
To access the Setup Menu, Press the Left Button and
Right Button simultaneously. The Setup Menu Indicator
will light and the lower display will read as shown below.
Note: The Setup Menu cannot be accessed during weld-
ing, or if a fault is displayed. To resume welding, exit the
Setup Menu.
2. PREFERENCE SELECTION
Scroll through the Preference list by rotating the Control
Knob. Press the Right Button to edit the selected prefer-
ence.
3. PREFERENCE CHANGE
Scroll through the preference options by rotating the
Control Knob. Change the preference setting by press-
ing the Right Button. To cancel, press the Left Button.
4. EXIT
To exit the Setup Menu, press both buttons simultane-
ously or select P.0 and press the Left Button. Sixty sec-
onds of inactivity will automatically exit the Setup Menu.
Note: If a product is missing any of the preference op-
tions listed below, a software update may be needed
from www.powerwavesoftware.com.
FIGURE B.7 - SETUP MENU
P
.
0
Exit
User Prefs
Setup Menu
Indicator
Mode Select
Panel (MSP)
Left Button
Control Knob
Right Button
PARAMETER
P.1 through P.99
P.101 through P.199
P.501 through P.599
DEFINITION
Unsecured Parameters (always adjustable)
Diagnostic Parameters (always read only)
Secured Parameters (only accessible with Weld Manager)