Lincoln Electric IM946 CRUISER Digital Tractor - Manual (Page 19)

Cruiser™ Tractor
INITIAL SETUP
2-6 2-6
3. Remove wire reel mounting spindle and
bracket. Loosen (two) clamp screws
using a 1/2-inch (13 mm) wrench and
slide wire reel mounting spindle and
bracket off the long support tube. Set
aside.
4. Remove the flux hopper assembly.
Loosen (two) clamp screws using a 1/2-
inch (13 mm) wrench and slide flux hop-
per assembly off the long support arm.
Set aside.
5. Remove manual steering wheel
assembly. Loosen (two) clamp screws
using a 1/2-inch (13 mm) wrench and
slide the assembly off the long support
tube. Set aside.
The Cruiser™ tractor is now ready to be assembled for welding. See Chapter 3 ,
Assembly .