Cables and connections – Lincoln Electric IM946 CRUISER Digital Tractor User Manual

Page 76

Text mode
Original mode

Cruiser™ Tractor

CABLES AND CONNECTIONS

9-9

4. Tighten the spinner nut as much as

possible by hand.

Always ensure the free end of the coil
is securely held while the tie wires are
being cut and until the wire is fully
loaded in the wire drive. Failure to do
this may result in a tangled coil.

-----------------------------------------------------

5. Cut and remove only one tie wire

holding the free end of the coil. Se-
curely hook the free end of the elec-
trode wire around the reel.

6. Cut and remove the remaining tie

wires.

7. Place the coil on the spindle and

then place the retaining coil on the
spindle. The spring will push out the
release bar when it is fully locked.

CAUTION