Assembly – Lincoln Electric IM946 CRUISER Digital Tractor User Manual

Page 35

Text mode
Original mode

Cruiser™ Tractor

ASSEMBLY

3-16

3. Disconnect sense lead (67) and

motor control lead from the Cruiser™
tractor chassis.

4. Remove the wire drive assembly

from the wire drive mounting clip
using a 5/16-inch (8 mm) Allen
wrench on the right side and 9/16-
inch (15 mm) wrench on left side.
Set aside.

5. Loosen the head mounting and slide

the assembly clamp by loosening
clamp screws using a 1/2-inch
(13 mm) wrench from the horizontal
cross support tube. Remove slide
assembly and set aside.