beautypg.com

Cables and connections – Lincoln Electric IM946 CRUISER Digital Tractor User Manual

Page 74

background image

Cruiser™ Tractor

CABLES AND CONNECTIONS

9-7

9-7

4. Tighten the strain-relief clamp using a

7/16-inch (11 mm) wrench.

Note:

It might be desirable to leave

this clamp loose at this time,
but ensure it is tightened be-
fore operating the Cruiser™
tractor, so the cable drag is
taken by the Cruiser™ tractor
and not the contact nozzle
connection.

5. Verify the electrode sense lead is

connected.

Note:

Appropriate electrode

extension and final electrode
alignment to the joint may be
set by using both cross-slide
adjustments. If for some rea-
son the electrode contact noz-
zle is not perpendicular to the
weld seam, it may be ad-
justed by slightly rotating the
drive roll faceplate.