Assembly – Lincoln Electric IM946 CRUISER Digital Tractor User Manual

Page 32

Text mode
Original mode

Cruiser™ Tractor

ASSEMBLY

3-13

18. Remount the electrode reel and

mounting bracket on the long sup-
port arm, so the spindle is centered
approximately 9 inches (225 mm)
from the long support arm clamp
bracket and facing the right-hand
side. The spindle should be horizon-
tally positioned. Tighten two clamp
screws using a 1/2-inch (13 mm)
wrench.

19. Remount the conduit anchor to the

end of the long support using a 7/16-
inch (11 mm) wrench.

20. Install the conduit by cutting to the

appropriate length, so one end fits
into the inlet of the wire straightener,
and the other end fits into the conduit
anchor.

• Do not weld without this tube in-

stalled!

-------------------------------------------------------

CAUTION

9.5” / 240mm