Lincoln Electric IM946 CRUISER Digital Tractor - Manual (Page 92)

Cruiser™ Tractor
OPERATION
10-15 10-15
WFS
Arc Strike
.
.
seconds
Start Time
7. Set the arc strike parameters. Range
is dependent on gear ratio.
8. Set the arc start parameters.
9. Set the burnback time. Range equals
0 to 2.0 seconds.
10. Configure the Cruiser™ Tractor as
desired with the setup menu. Use
the setup to change the travel start
and travel end options. See
Setup
Features Menu on page 10-24 .
11. Position the Cruiser™ Tractor on the
joint.