Assembly – Lincoln Electric IM946 CRUISER Digital Tractor User Manual

Page 43

Text mode
Original mode

Cruiser™ Tractor

ASSEMBLY

3-24

30. Install the flux delivery tube from

the flux hopper to the flux cone or
to the end of the contact nozzle
assembly using the (two) flux tube
securing rings.

Note:

The flux cone assembly can be
used. See page 3-4 step 8 for
flux cone installation.

31. Reconnect the sense lead (67) and

motor power cable to the Cruiser™
tractor chassis.

32. Install the control pendant with the

control cable under the rear strain
relief loop. The control pendant can
be stored on the front of the flux
hopper when the control pendant is
not in use.

The Cruiser™ tractor is now ready to be set into the work positioned at 45˚ or placed in a
suitable fixture.