Lincoln Electric IM946 CRUISER Digital Tractor - Manual (Page 47)

Cruiser™ Tractor
WHEEL CONFIGURATIONS
4-4 4-4
Manually Steered, Three-Wheeled Welding
When the Cruiser™ tractor is assembled for manual steering, the operator adjusts the
travel direction with a spring loaded steering bar.
1. Prop up or raise the Cruiser™ trac-
tor, so the front wheels are off the
ground.
2. Remove the front outrigger assem-
bly by removing two bolts using a
7/16-inch (11 mm) wrench.
3. Loosen two clamp bolts using a
1/2-inch (13 mm) wrench on each
front steering wheels. Slide the
steering wheels off of the tubes.