Assembly – Lincoln Electric IM946 CRUISER Digital Tractor User Manual

Page 36

Cruiser™ Tractor

ASSEMBLY

3-17

6. Move horizontal cross support tube

by loosening its clamp and sliding to
the left until the tube is about equally
spaced on both sides of the mast.
Tighten the clamp.

Note:

This may require some minor
adjustment later.

7. Block the Cruiser™ tractor to slightly

elevate front wheel assemblies and
front wheel support tubes.

8. Loosen both front wheel assembly

clamp brackets with two machine
screws using a 1/2-inch (13 mm)
wrench and slide both assemblies
from support tubes.