Lincoln Electric IM946 CRUISER Digital Tractor - Manual (Page 28)

Cruiser™ Tractor
ASSEMBLY
3-9 3-9
1/2”/13mm
6. Slide wire drive mounting bracket to-
ward the right-hand end of the hori-
zontal slide about 1/2 inch (13 mm)
from end.
If more reach to weld seam is de-
sired, loosen the cross slide clamp
and slide to the right, or loosen the
horizontal cross seam tube clamp
and slide the tube to the right using a
1/2-inch (13 mm) wrench.
7. Tighten the wire drive bracket
mounting screws with four nuts using
a 1/2-inch (13 mm) wrench.
8. Install the contact tip to the contact
nozzle. Install the flux cone assembly
to the contact tip.