Lincoln Electric IM946 CRUISER Digital Tractor - Manual (Page 26)

Cruiser™ Tractor
ASSEMBLY
3-7 3-7
Right-Hand Butt and Groove Welds
Figure 3-2 The Cruiser™ Tractor Configured for
Right-Hand Track Guided Butt Welds
1. Loosen wire drive mounting bracket
from horizontal cross slide by loosen-
ing four nuts using a 1/2-inch (13
mm) wrench.
2. Raise the wire drive using the vertical
slide crank until the contact nozzle
clears the front support tube.
1/2” / 13mm